Overview

  1. Microelectromechanical system (MEMS) sensor, single axis output.
  2. Output signal: 4~20mA. RS-485 communication interface, support 9600 bps/230400 bps speed automatic adjustment.
  3. Output data: Velocity (RMS)
  4. It can be connected with third-party existing PLC.
  5. Also provided: AD-300 analog-digital conversion device, which can convert 4-20mA / 0-10V analog signals into digital RS-485 signal (optional).
  6. The stainless steel used is 316L grade, (the hardest metal grade) with high installation torque of 12N-m, better than industry standard 6-8 N-m.
  7. Support connector type MIL-C-5015 .

Features

Product Image :

Size :

Specifications

Supply Voltage
  • 15 ~ 34 VDC (standard PLC load: 24VDC, 250 ohm)
Measurement Range
  • 0~25 mm/s (RMS)
Frequency Response
  • 10Hz to 1000Hz for ISO2954
Resolution
  • at least 0.01 mm/sec
Output signal
  • 4-20mA
Measurement error
  • < ± 5%
Amplitude linearity
  • ≤2%
Transverse sensitivity
  • ≤5%
Input/output
  • two-wire
Housing material
  • 316L grade stainless steel
Installation torque
  • 12Nm (exceeding the general industry standard 6-8 Nm)
Size (not including military standard connector)
  • Diameter (maximum width) : 29.0mm / height : 48.8mm (not including cable)
Weight
  • 53g (without cable)
Operating temperature
  • -40 ~85 °C
Maximum Shock
  • 10,000g
Sealing
  • IP67