CB0205

Tecom CO1011 is a GPON based EoC MDU. Combined with TECOM's CB0205 EoC EP, it can be used to solve MSO two-way high speed internet and IP value added services operating within an existing HFC network without expensive DOCSIS 3.0 upgrades. It can also be the solution for FTTB providing TV/Data/VoIP triple play services on one coaxial cable. CO1011 supports one GPON WAN and 2 RF interfaces with reliable QoS and rate limiting. CO1011 also supports an EoC line diagnostic function, SNMP and OMCI for remote management and Web/CLI. CB0205 supports 2 RF interfaces and 2 RJ45 Fast Ethernet interfaces.

• Support full GPON bandwidth of up to 2.5Gbps 1490nm downstream and to 2.5Gbps 1490mn downstream and 1.25Gpbs 1310um upstream access
• HPNA EoC

Interface

• One SC/APC connector for GPON transceiver (Class B+)
• Two-of RF interfaces
• Two of 10/100 Mbits Ethernet Interface (EP CB0205)
• One power jack for 100-240 VAC input
• LEDs：PWR, SYS, PON, Coax, C.Q.

Compliant Standards

• ITU-T G.984.1, 984.2, 984.3, 984.4
• ITU-T G9954
• IEEE802.1p
• IEEE802.1Q
• IEEE802.3
• IEEE802.3u
• IEEE802.3x

QoS

• Port-based VLAN
• Q-in-Q VLAN
• Strict Priority
• Weighted Round-Robin priority
• Multicasting IGMP v1,v2 snooping

Security

• AES-128 encryption per Port-ID
• Supporting to Max.256 MAC filtering

Management

• Remote management via OMCI channel
• CLI management via Telnet
• Remote firmware upgrade via FTP server or OMCI channel Web

Operating Environment

• Operating Temperature：0~45℃
• Storage Temperature：-20~+65℃
• Operating Humidity：15%~85% (non-condensed)
• Storage Humidity：10%~90% (non-condensed)

Power Requirement

• Power：100-240 VAC input for MDU CO1011
• Power：12V DC/0.5A max input for EP CB0205

Tecom CO1011 is a GPON based EoC MDU. Combined with TECOM's CB0205 EoC EP, it can be used to solve MSO two-way high speed internet and IP value added services operating within an existing HFC network without expensive DOCSIS 3.0 upgrades. It can also be the solution for FTTB providing TV/Data/VoIP triple play services on one coaxial cable. CO1011 supports one GPON WAN and 2 RF interfaces with reliable QoS and rate limiting. CO1011 also supports an EoC line diagnostic function, SNMP and OMCI for remote management and Web/CLI. CB0205 supports 2 RF interfaces and 2 RJ45 Fast Ethernet interfaces.

• Support full GPON bandwidth of up to 2.5Gbps 1490nm downstream and to 2.5Gbps 1490mn downstream and 1.25Gpbs 1310um upstream access
• HPNA EoC

Interface

• One SC/APC connector for GPON transceiver (Class B+)
• Two-of RF interfaces
• Two of 10/100 Mbits Ethernet Interface (EP CB0205)
• One power jack for 100-240 VAC input
• LEDs：PWR, SYS, PON, Coax, C.Q.

Compliant Standards

• ITU-T G.984.1, 984.2, 984.3, 984.4
• ITU-T G9954
• IEEE802.1p
• IEEE802.1Q
• IEEE802.3
• IEEE802.3u
• IEEE802.3x

QoS

• Port-based VLAN
• Q-in-Q VLAN
• Strict Priority
• Weighted Round-Robin priority
• Multicasting IGMP v1,v2 snooping

Security

• AES-128 encryption per Port-ID
• Supporting to Max.256 MAC filtering

Management

• Remote management via OMCI channel
• CLI management via Telnet
• Remote firmware upgrade via FTP server or OMCI channel Web

Operating Environment

• Operating Temperature：0~45℃
• Storage Temperature：-20~+65℃
• Operating Humidity：15%~85% (non-condensed)
• Storage Humidity：10%~90% (non-condensed)

Power Requirement

• Power：100-240 VAC input for MDU CO1011
• Power：12V DC/0.5A max input for EP CB0205